Fast Stochastic Indicator (2024)

A momentum technical indicator that aims to measure the trend in prices and identify trend reversals

Over 1.8 million professionals use CFI to learn accounting, financial analysis, modeling and more. Start with a free account to explore 20+ always-free courses and hundreds of finance templates and cheat sheets.

Start Free

Written byCFI Team

What is the Fast Stochastic Indicator?

The fast stochastic indicator (%K) is a momentum technical indicator that aims to measure the trend in prices and identify trend reversals. The indicator was developed by securities trader and technical analyst George Lane.

The indicator is driven by two parameters: the lookback period and the smoothing parameter. The lookback period is the period over which the oscillator is calculated. The smoothing parameter is the number of periods over which the moving average of the oscillator is calculated. It is called an oscillator because the value of the indicator oscillates between 0 and 100. It can be computed as follows:

Fast Stochastic Indicator (1)

Where:

  • C = Current Price
  • L = Period Low
  • H = Period High
  • %K = The fast oscillator computed using the above formula

The lookback period is usually 5 days or 14 days, but it can be any number between 5 days and 21 days. The indicator is not effective over longer periods because, over longer periods, stock prices tend to assume an upward trend.

There is also a second quantity computed known as %D, which is the 3-day SMA of the %K. It is a smoothed version of the %K. It is computed because %K is a volatile indicator and can lead to spurious signals. A smoothed version (%D) moves much slower than the %K; hence the signals generated indicate a stronger trend.

Interpretation

The fast stochastic oscillator (%K) is a momentum indicator, and it is used to identify the strength of trends in price movements. It can be used to generate overbought and oversold signals. Typically, a stock is considered overbought if the %K is above 80 and oversold if %K is below 20. Other widely used levels are 75 and 25, respectively.

The above levels may be used as buy (%K below 20) or sell (%K above 80) to create a simple mechanical trading strategy. In practice, the thresholds are used in combination with other indicators and serve as warning signals.

George Lane’s Strategy

George Lane, the indicator’s creator, suggests the following strategy. Treat the overbought and oversold thresholds as preconditions. Once the indicators hit such levels, the trader must look for a divergence. A divergence is when the price moves in a different direction from the indicator. There are two types of divergences, bull divergence and bear divergence.

1. Bull Divergence

The bull divergence is used to identify buy signals. When the stochastic oscillator falls below 20, the trader should look for two further conditions. First, the trader should check if the %K has fallen below %D, then see if there is a divergence in the movement of %K and the stock price.

If the stock price has fallen further, but the %K rises, then it is a reversal in the trend. According to the stochastic oscillator analysis, it is a buy signal, and the trader should place a buy order. The stock is sold when the oscillator crosses 80, and a sell signal is generated.

2. Bear Divergence

The bear divergence is used to identify sell signals. When the stochastic indicator rises above 80, it is the precondition to search for the bear divergence. A bear divergence occurs when the %K is above %D.

Further, the stock price makes a high while the oscillator (%K) falls. It indicates a weakness in the uptrend and that the price may begin to fall. According to stochastic oscillator analysis, it is a sell signal, and the trader should place a sell order. The stock is repurchased when the next buy signal is generated.

The above system can also be used for a long-short framework, where, instead of just selling the stock, the trader can actively short the stock when a sell signal is generated by the indicator. It is a riskier strategy but can be used as a trend-following strategy for hedging tail risk.

Stochastic Oscillator Model Example

Download our free Stochastic Oscillator Excel template, and start modeling today!

Excel Tutorial

The slow stochastic indicator can be easily computed using MS Excel. The following is a short tutorial on how to calculate the indicator.

Step 1: Collect the daily closing prices of the index or the stock to study.

Step 2: Calculate the Fast Stochastic Oscillator over the desired lookback period (5-21 days). Use the MIN() and MAX() functions to calculate the low price (L) and high price (H), respectively. Compute the Fast %K using the above formula. (See below)

Fast Stochastic Indicator (2)

Step 3: Compute the 3-day simple moving average of the Fast Stochastic Oscillator (Fast %K) to get the %D (equivalent to the Slow %K).

Fast Stochastic Indicator (3)

Trading Strategy

A simple trading strategy using the fast stochastic indicator can be executed as follows:

The stochastic indicator generates buy and sell signals. The signals can be used to create a dedicated long or short strategy, as well as a long-short strategy. In our strategy, the buy signal is generated when the %K falls below 20, and a sell signal is triggered when the %K rises above 80.

The strategy is a long-short strategy. When the buy signal is triggered, the strategy is long the with a 100% weight. On the other hand, when a sell signal is generated, the strategy is short the S&P 500 Index with a negative 50% weight.

The result of following the above strategy is summarized below:

Fast Stochastic Indicator (4)

The total return for the strategy over the backtest period is -15%, compared to a simple buy and hold for the S&P 500 Index over the same period, which would’ve returned close to 50%. It is an unprofitable strategy in the long run, but the chart reveals something interesting. The short portion of the strategy is effective at making money during a drawdown. It is further supported by the fact the indicator generates more sell signals than by signals. (See Figure 4 below).

Fast Stochastic Indicator (5)

Fast vs. Slow Indicator

The fast stochastic indicator is much more volatile than the slow indicator. It generates many more buy and sell signals than the slow indicator. If followed naively, the choppiness of the fast indicator can lead to increased transaction costs due to the many trading signals. The signals generated may not be as strong, and there might be losses due to an incorrect decision.

The fast indicator is also more prone to being stuck at the extremes of 0 and 100 for longer periods of time than the slow indicator. Hence, the slow stochastic indicator was developed to overcome the high volatility of the fast indicator.

Additional Resources

To keep learning and advance your career, the following resources will be helpful:

  • Advanced Technical Analysis
  • Hindenburg Omen
  • Technical Indicator
  • Volatility
  • See all equities resources
Fast Stochastic Indicator (2024)

FAQs

Fast Stochastic Indicator? ›

The fast stochastic oscillator (%K) is a momentum indicator, and it is used to identify the strength of trends in price movements. It can be used to generate overbought and oversold signals. Typically, a stock is considered overbought if the %K is above 80 and oversold if %K is below 20.

What is the best setting for fast stochastic? ›

Stochastic Indicator Settings

The default settings are 5, 3, 3. Other commonly used settings for Stochastic include 14, 3, 3, and 21, 5, 5. Stochastic is often referred to as Fast Stochastic with a setting of 5, 4, Slow Stochastic with a setting of 14, 3, and Full Stochastic with a setting of 14, 3, 3.

What is the best indicator for stochastics? ›

As a momentum oscillator, it pairs well with other momentum oscillators to confirm its indication. Some of the best technical indicators to pair with the stochastic oscillator are relative strength index (RSI), moving average crossovers, and moving average convergence divergence (MACD).

What is stochastic 14-3-3? ›

Stochastic (14, 3, 3) (STOCH)

Stochastic Oscillator 14 3 3 (STOCH) is a range bound momentum oscillator. The Stochastic 14 3 3 indicator is designed to display the location of the close compared to the high/low range over a user defined number of periods.

What is the difference between slow stochastic and fast stochastic? ›

Both fast and slow stochastics are oscillators that look at the momentum of price changes for a given security. The fast stochastic is agile and changes direction quickly in response to sudden changes. The slow stochastic changes direction more slowly but is less likely to give false signals.

How to set stochastic 5-3-3? ›

The Stochastics is included in the default set of MetaTrader. You can add it to the chart by clicking “Insert” – “Indicators” – “Oscillators” and then choosing “Stochastic Oscillator”. The Stochastic Oscillator can be used on all timeframes. The default settings are 5, 3, 3.

What do k and d mean in stochastic? ›

The default setting for the Stochastic Oscillator is 14 periods, which can be days, weeks, months or an intraday timeframe. A 14-period %K would use the most recent close, the highest high over the last 14 periods and the lowest low over the last 14 periods. %D is a 3-day simple moving average of %K.

Which indicator is better MACD or stochastic? ›

Separately, the two indicators function on different technical premises and work alone; compared to the stochastic, which ignores market jolts, the MACD is a more reliable option as a sole trading indicator.

Which indicator has the highest accuracy? ›

Which is one of the most accurate trading indicators? The most accurate for trading is the Relative Strength Index. It is considered one of the best momentum indicators for intraday trading. It helps investors identify the shares which are bought and sold in the market.

How do day traders use stochastics? ›

In a basic overbought/oversold strategy, traders can use the stochastic indicator to identify trade exit and entry points. Generally, traders look to place a buy trade when an instrument is oversold. A buy signal is often given when the stochastic indicator has been below 20 and then rises above 20.

Which indicator gives a buy-sell signal? ›

Stochastics are a favored technical indicator because they are easy to understand and have a relatively high degree of accuracy. It falls into the class of technical indicators known as oscillators. The indicator provides buy and sell signals for traders to enter or exit positions based on momentum.

Is RSI or stochastic better? ›

Relative strength index was designed to measure the speed of price movements. The stochastic oscillator formula works best when the market is trading in consistent ranges. RSI is generally more useful in trending markets and stochastics are more useful in sideways or choppy markets.

What is the %D of fast stochastic? ›

Stochastics are most effective in broad trading ranges or slow moving trends. Two lines are graphed, the fast oscillating %K and a moving average of %K, commonly referred to as %D. Generally, the area above 80 indicates an overbought region, while the area below 20 is considered an oversold region.

What is the best stochastic indicator for day trading? ›

For OB/OS signals, the Stochastic setting of 14,3,3 works well. The higher the time frame the better, but usually a H4 or a Daily chart is the optimum for day traders and swing traders.

What is the best stochastic model? ›

The Markov chain process is the best example of a stochastic model where the probability distribution of time t + 1 depends on the state at time t and does not depend on the states before time t.

What is the formula for stochastic fast? ›

The Stochastic Fast Formula

Fast %K: [(Close – Low) / (High – Low)] x 100. Fast %D: Simple moving average of Fast K (usually 3-period moving average)

What are the best stochastic oscillator settings for a 15-minute chart? ›

The best stochastic settings for a 15-minute stock chart is generally a 14-period %K (fast stochastic line) and a 3-period %D (slow stochastic line) with settings of 14,3,3.

What is the best stochastic RSI setting for daily chart? ›

The default settings for the StochRSI indicator are as follows. K= 3, D = 3, RSI = 14, and Stochastic Length= 14. These default settings work well for 15 15-minute timeframes and above. Change your Stochastic Length to 8 for a smaller timeframe.

What are the best settings for MACD and stochastic? ›

What settings should be used for the MACD and the stochastic? While the default MACD settings are 12,26 & 9 and the default settings for the stochastic are 5,3 & 3, it is possible to change the settings to a longer period may provide more consistent signals.

Top Articles
Latest Posts
Article information

Author: Duncan Muller

Last Updated:

Views: 5383

Rating: 4.9 / 5 (79 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Duncan Muller

Birthday: 1997-01-13

Address: Apt. 505 914 Phillip Crossroad, O'Konborough, NV 62411

Phone: +8555305800947

Job: Construction Agent

Hobby: Shopping, Table tennis, Snowboarding, Rafting, Motor sports, Homebrewing, Taxidermy

Introduction: My name is Duncan Muller, I am a enchanting, good, gentle, modern, tasty, nice, elegant person who loves writing and wants to share my knowledge and understanding with you.